Type | Characteristics |
WIMOD WIRELESS transmission can be applied to load cells type:
C2S - CLS - D100 T20 - TCE | |
CLS
Compressione | Nominal Load from 30 to 500 t Class (OIML R60): C1, C2 Combined Error: 0.045%, 0.023% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 |
CBS Compressione | Nominal Load from 250 kg to 100 t Linearity: 0.03% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 ATEX certificate (Zones 1 and 21) |
C2S
Compressione | Nominal Load from 100 kg to 200 t Class (OIML R60): C1, C2, C3 Combined Error: 0.045%, 0.023%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 ATEX certificate (Zones 1 and 21) |
C2SAMP
Compressione | Nominal Load from 100 kg to 200 t Linearità: 0.03% Material: Stainless Steel Output: 4-20mA, 5V, 10V LASER welded Protection: IP68 |
UPC
Compression | WEIGHING UNIT Nominal Load from 100 kg to 30 t Executed in: Stainless Steel AISI 304.
Equipped with a system of: Auto-alignment. Transversal sliding |
TCA
Compression Tension | Nominal Load from 1 to 50 kg Linearity: 0.03% Material: Aluminium Output: 2mV/V Protection: IP20 |
TCE
Compression Tension | Nominal Load from 350 kg to 20t Linearity: 0.03% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP67
ATEX certificate (Zones 1 and 21) |
TS/TSA
Tension | Nominal Load from 10 kg to 7.5 t Class (OIML R60): C2, C3, C4 Combined Error: 0.023%, 0.018%, 0.015% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 (10, 25, 50kg IP65) |
TSAMP
Compression Tension | Nominal Load from 10 kg to 7.5 t Linearity: 0.03% Material: Stainless Steel Output: 4-20mA, 5Volt, 10Volt LASER welded Protection: IP65 |
T20
Tension | Nominal Load from 5 to 20 t Class (OIML R60): C2, C3 Combined Error: 0.023%, 0.019% Materiale: Stainless Steel Output: 2mV/V LASER welded |
D100
Tension | Nominal Load from 20 to 100 t Linarity: 0.10% Material: Stainless Steel Output: 1mV/V LASER welded |
F1
| Nominal Load from 2.5 to 200 kg Class (OIML R60): C2, C3 Combined Error: 0.026%, 0.020% Material: Stainless Steel Output: 2mV/V LASER welded |
F3
| Nominal Load from 10 kg to 2 t Class (OIML R60): C2, C3 Combined Error: 0.027%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
FT1/FT1A
| Nominal Load from 350 kg to 7.5 t Class (OIML R60): C2, C3 Combined Error: 0.024%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
UPF1
| WEIGHING UNIT Nominal Load from 350 kg to 5 t Executed in: Stainless Steel AISI 304 WITH ELASTOMER |
FT2
| Nominal Load from 500 kg to 5 t Class (OIML R60): C2, C3 Combined Error: 0.024%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
UPFT2
| WEIGHING UNIT Nominal Load from 500 kg to 2 t Executed in: Stainless Steel AISI 304. WITH ELASTOMER |
FT6 OFF-CENTER(Platform size400x400mm)
| Nominal Load from 5 to 100 kg Class (OIML R60): C2 Combined Error: 0.028% Material: Stainless Steel Output: 2mV/V LASER welded
IP67 |
CFR
Load cell for the measurement of rolled sections tension (sheets, rubber, paper, fabric, etc...) | Nominal Load from 15 to 100 kg Linearity: 0.50% Ball Bearings: 35x15 (SKF 1202) Output: 2mV/V Protection: IP40 |